Castle
Tile Adhesive

“HIGH STRENGTH FLEXIBLE ADHESIVE FOR ANY TYPE TILES & STONES AT ANY HEIGHT!”

The cracking of tiles/stone or a hollow sound on a tiled floor is caused by the cement and sand mixture which doesn’t form a level base to cover the entire tile surface when fixing them. The perfect solution for this is to use CASTLE thin-base adhesives.

CASTLE Tile Adhesive is a factory made single component cementitious dry powder polymer-modified adhesive which is mixed with water or special liquid additive to form a paste, providing problem-free, full variety of tile and natural stone in fresh constructions or complete re-tiling installation. CASTLE thin-base adhesives have high bonding strength allowing the tiles to directly fixed to the substrate.

Manufactured under stringent quality control procedures, CASTLE products have been globally proven and professionally endorsed for years.

Castle Tile Adhesive - 111

Castle Tile Adhesive – 111 is a polymer modified, cementitious adhesive, that can be used in slurry form on semi-wet screed, for wet-on-wet fixing of tiles, as well as an adhesive paste for fixing tiles on floor and wall.

USES & APPLICATIONS

  • For Internal tiling application on floor & walls.
  • For External tiling application on floors.
  • Tile repairs & Rehabilitation works.
Features
Description
Standard
Type 1
Product Type & Color
Dry Powder & Gray Color
Packaging
Available in 20Kg BOPP Bag with liner
Shelf Life
12 Months from the date of manufacturing
Storage
Store in a dry place away from moisture

Advantages of Adhesive - 111

ADVANTAGES OF ADHESIVE – 111

  • Ready-to-use mixtures

  • High strength formula

  • Tile-on-Tile application

  • Hassle-free and long lasting

  • Excellent Waterproofing Properties

  • Easy to install – fast and economical

  • Improved shock and impact resistance

HOW TO APPLY

  • Mix Adhesive-Water in the ratio of 3:1.
  • Allow mixture to stand 5 to 10 minutes for chemical activated.
  • Apply the paste of “CASTLE Tile Adhesive” with thickness of approx 3mm on surface.
  • Comb the mixture on surface with notched trowel.
  • Place the tiles within 10 minutes of mixing and press firmly with twisting movement.
  • Tap the tiles gently with a wooden block and hammer to ensure complete coverage of the backside of the tiles and to eliminate the possibility of any air voids.
  • Remove excess paste from tiles surface with a damp cloth / sponge.
  • “CASTLE Tile Grout” should be filled in time, 24 hours after fixing of tiles.

How to Apply